- Home
- Products
- Floor Lighting
- Floor Lamps
- PH 3½-2½ Floor Lamp
PH 3½-2½ Floor Lamp
Variants
Poul Henningsen designed the three-shade system back in 1925-1926. The first lights using the system were designed by PH in cooperation with Louis Poulsen for an exhibition in Paris. This partnership continued up until his death in 1967. Throughout his life, PH sought to create glare-free light, direct light where it was most needed, and create soft shadows, using incandescent bulbs as a light source. The 3½-2½ Floor light is a member of the three-shade family which numbers 30 lights today, including three for outdoor use. Thus PH did not just design a light, but an entire system – around a thousand different models have been produced over the years. This wide selection consisted of table, floor and wall lamps, as well as a number of different chandeliers, which were very popular in the 30s for lighting private homes from high ceilings. There were countless combination options. The lights were available in different colours, as well as a range of sizes. The first shades were made of metal with a painted undersurface, such as white, gold or silver – depending on whether diffuse, warm or cold light was desired. Glass was later introduced for the three-shade system. In addition to the downward-directed light, glass lamps illuminated the room. PH was the first person to pursue a scientific approach to light and use the logarithmic spiral as a basis. By using a design based on the logarithmic spiral he achieved even distribution of light over the entire curve of the shade. This even light distribution, together with the diffuse reflection through the glass, made it possible to control glare and shadow. Each shade reduces the amount of light equally, due to their distance from the light source. The PH light model numbers refer to the shade size. Each top shade had a corresponding set of middle and lower shades. In the ‘pure’ models, such as the 2/2, the top shade has a size of about 20 cm, with corresponding lower shades. PH 3½-2½ Floor consists of an approximately 35 cm top shade with lower shades. These ‘hybrid’ models were introduced due to the desire to hang pendants at lower heights. The system was also used for floor, table and wall lamps. PH 3½-2½ Floor in its current form was introduced in 2002.
View on manufacturer siteSpecifications
- Model / SKU
- 90771-5744162199-01_249777
- Dimensions
- L 330 × W 330 × H 1300 mm
- Weight
- 16.1 kg
- Material
- Brass, Glass, Steel
- Colors
- High Lustre Chrome Plated
- Designer
- Poul Henningsen
- Lumens
- 567
- IP Rating
- IP20
- Wattage
- 7
- Bulb Base
- E27
- Bulb Quantity
- 1
- Finish Info
- Mouth-blown three-layered opal glass with sandblasted inner side. Brass Metallised, Black Metallised or High Lustre Chrome Plated.
- Class Information
- Ingress protection IP20. Electric shock protection II w/o ground.
- Mounting
- 2.5 m. Cord with plug. On/off foot switch provided.
- EAN
- 5703411127124
- Switch Type
- Black floor switch
Downloads
50422.webp
Dimension Drawing · 43.7 KB
PH 3½-2½ Floor Lamp-90771 Cut Sheet.pdf
Datasheet · 188.8 KB
L11868A PH 3½-2½ floor Duralamp Tecno vintage 7W C0130_BEAM.JPG
Lighting Data (IES/LDT) · 165.2 KB
L11868A PH 3½-2½ floor Duralamp Tecno vintage 7W C0130_ISOLUX.JPG
Lighting Data (IES/LDT) · 247.9 KB
L11868A PH 3½-2½ floor Duralamp Tecno vintage 7W C0130_POLAR.JPG
Lighting Data (IES/LDT) · 383.2 KB
90771_PH 3½-2½ FLOOR GLASS 70W BLK PVD CL. II.fbx
BIM Model · 7.7 KB
90771_PH 3½-2½ FLOOR GLASS 70W BRASS PVD CL II (1).fbx
BIM Model · 7.7 KB
90771_PH 3½-2½ FLOOR GLASS 70W BRASS PVD CL II.fbx
BIM Model · 7.7 KB
90771_PH 3½-2½ FLOOR GLASS 70W E27 CHR CL II.fbx
BIM Model · 7.1 KB








