- Home
- Products
- Table Lighting
- Table Lamps
- PH 4/3 Table Lamp
PH 4/3 Table Lamp
Poul Henningsen designed the three-shade system back in 1925-1926. The first lights using the system were designed by PH in cooperation with Louis Poulsen for an exhibition in Paris. This partnership continued up until his death in 1967. Throughout his life, PH sought to create glare-free light, direct light where it was most needed, and create soft shadows, using incandescent bulbs as a light source. PH 4/3 Table is a member of the three-shade family. Thus PH did not just design a light, but an entire system – around a thousand different models have been produced over the years. This wide selection consisted of table, floor and wall lamps, as well as a number of different chandeliers, which were very popular in the 30s for lighting private homes from high ceilings. There were countless combination options. The lights were available in different colours, as well as a range of sizes. The first shades were made of metal with a painted undersurface, such as white, gold or silver – depending on whether diffuse, warm or cold light was desired. Glass was later introduced for the three-shade system. In addition to the downward-directed light, glass lamps illuminated the room. PH was the first person to pursue a scientific approach to light and use the logarithmic spiral as a basis. By using a design based on the logarithmic spiral he achieved even distribution of light over the entire curve of the shade. This even light distribution, together with the diffuse reflection through the glass, made it possible to control glare and shadow. Each shade reduces the amount of light equally, due to their distance from the light source. The PH light model numbers refer to the shade size. Each top shade had a corresponding set of middle and lower shades. In the ‘pure’ models, such as the 2/2, the top shade has a size of about 20 cm, with corresponding lower shades. PH 4/3 Table consists of an approximately 40 cm top shade, but uses lower shades from the 3/3 model. These ‘hybrid’ models were introduced due to the desire to hang pendants at lower heights. The system was also used for wall, table and floor lamps. PH 4/3 Table in its current form was introduced in 1966.
View on manufacturer siteSpecifications
- Model / SKU
- 90391-5744615015-04_249776
- Dimensions
- L 450 × W 450 × H 540 mm
- Weight
- 2.8 kg
- Material
- Aluminium, Brass, Steel
- Colors
- White
- Designer
- Poul Henningsen
- Lumens
- 576
- IP Rating
- IP20
- Wattage
- 100
- Bulb Base
- E27
- Bulb Quantity
- 1
- Finish Info
- White, powder coated. High lustre chrome plated.
- Class Information
- Ingress protection IP20. Electric shock protection II w/o ground.
- Mounting
- 2.9 m. Cord with plug. On/off switch provided.
- EAN
- 5703411285459
Downloads
PH_4_3_Table_Lamp_90391_Catalogue_page_louis_poulsen.pdf
Datasheet · 812.0 KB
90391_PH 4-3 TABLE 100W E27 II WHT V2.fbx
BIM Model · 13.6 KB
50422.webp
Dimension Drawing · 87.8 KB
3 Table Lamp-90391 Cut Sheet.pdf
Datasheet · 24.2 KB
L9627A PH 4_3 Table 1X100W E27 C0054_BEAM.JPG
Lighting Data (IES/LDT) · 163.7 KB
L9627A PH 4_3 Table 1X100W E27 C0054_ISOLUX.JPG
Lighting Data (IES/LDT) · 299.8 KB
L9627A PH 4_3 Table 1X100W E27 C0054_POLAR.JPG
Lighting Data (IES/LDT) · 393.0 KB






